Quality Assurance Inspector - CMM 3rd Shift in Parsons, KS at Ducommun

Date Posted: 10/24/2018

Job Snapshot

Job Description

Quality Assurance Inspector - CMM 3rd Shift

Job Description

Job Summary & Essential Functions:  The
following describes in general terms the purpose and scope of the position. Tests
and inspects products at various stages of production process and compiles and
evaluates statistical data to determine and maintain quality and reliability of
products.

Operation of CMM and other various
inspection equipmentReview and validate CMM inspection
reports to determine compliance to hardware. Inspect production hardware and tooling
using CMM inspection equipment, which includes first part verification and
calibration/verification of existing tooling.Interprets engineering drawings, and
confers with management and engineering staff to determine quality and
reliability standards.Interprets and inspects to customer
supplied digital product definition and engineering drawings.Utilizes Unigraphics and Catia software
to document and validate CMM inspection results.Develops CMM inspection programs and
part models for production hardware and tooling.Evaluates data and writes reports to
validate or indicate deviations from imposed customer requirements.Sets up and performs part and tool
layout to support production in manufacturing compliant hardware.Supports engineering and production in
the development of tooling by tool layout digitization.Recommends modifications of existing
quality or production standards to achieve optimum quality within limits of
equipment capability.Participates in quality meetings.Deals with customers on issues
pertaining to CMM inspection and data interpretation.Organizes and maintains electronic and
hard copy storage of inspection records.Maintains inventory and orders
necessary CMM supplies and equipment.Responsible for the proper handling and
management of hazardous waste generated in their work area.Other duties as assigned.















 

 

 

 

Required Skills &
Qualifications:  To perform this job successfully, an
individual must be able to perform each essential duty satisfactorily.  The requirements listed below are
representative of the knowledge, skills, qualifications, competencies, abilities
and any physical demands if required. 
Physical demands are representative of those that must be met by an
employee to successfully perform the essential requirements of this job. 

Ability to read and interpret
blueprints, mylars and other inspection media.Two years aerospace inspection, quality
experience or machinist experience is required.Previous experience operating CMM
equipment is desired.Familiarity with CMM inspection
operations and part or tool lay out.Basic
understanding of GDT.Math
skills should consist of CMM coordinates, datum’s and other math skills
necessary to perform CMM inspection.Ability to use measuring instruments
including but not limit to calipers, micrometers, indicators, and scales. Knowledge and use of Unigraphics and
Catia software (CAD/ CAM), and digital data/digital product definition. Knowledge of AS9100, SPC and NADCAP is
a plus.Have a good memory for detail.Strong analytical and communication
skills.









Organized and have good record keeping
skills.Read and understand internal procedures
and policiesTeam oriented with a continuous
improvement outlook. Required
Experience/Education/Training/Certifications:  To perform this job successfully, an individual must possess
the outlined experience level, education, training, minimum years of
experience, product or industry knowledge plus any certifications in order to
be considered. 




High School Diploma; up to 3 years
related experience in job function and/or training; equivalent combination of
education and experience Two years aerospace inspection, quality
experience or machinist experience is required.Basic
understanding of GDT.


 

                                                                                                                                                           

Work Environment and Safety Equipment
Required: The work environment characteristics
described here are representative of those an employee encounters while
performing the essential functions of the job. 

Specific vision abilities required
include close vision, distance vision, peripheral vision, depth perception, and
the ability to adjust focus.Annual eye exam is required.Must be able to frequently lift and/or
move up to 50 pounds; reach with hands and arms; and effectively communicate.Regularly required to stand; walk; use
hands to finger, handle, or feel objects, tools, or controls.Occasionally required to sit and stoop.Safety Footwear shall be in accordance with the following:
ASTM standard F2413-05 with minimum impact resistance, compression resistance
and metatarsal designation ratings of 75 foot pounds (i.e. ASTM F2413-05 I/75
C/75 Mt/75), which are viewable on the inside tag of footwear. Management reserves the right to add,
modify, change or rescind the work assignments in accordance with business
needs, and to make reasonable accommodations so that qualified employees can
perform the essential function of the job.






Job Summary & Essential Functions:  The following describes in general terms the purpose and scope of the position. Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products.

  • Operation of CMM and other various inspection equipment

  • Review and validate CMM inspection reports to determine compliance to hardware.

  • Inspect production hardware and tooling using CMM inspection equipment, which includes first part verification and calibration/verification of existing tooling.

  • Interprets engineering drawings, and confers with management and engineering staff to determine quality and reliability standards.

  • Interprets and inspects to customer supplied digital product definition and engineering drawings.

  • Utilizes Unigraphics and Catia software to document and validate CMM inspection results.

  • Develops CMM inspection programs and part models for production hardware and tooling.

  • Evaluates data and writes reports to validate or indicate deviations from imposed customer requirements.

  • Sets up and performs part and tool layout to support production in manufacturing compliant hardware.

  • Supports engineering and production in the development of tooling by tool layout digitization.

  • Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.

  • Participates in quality meetings.

  • Deals with customers on issues pertaining to CMM inspection and data interpretation.

  • Organizes and maintains electronic and hard copy storage of inspection records.

  • Maintains inventory and orders necessary CMM supplies and equipment.

  • Responsible for the proper handling and management of hazardous waste generated in their work area.

  • Other duties as assigned.

 

 

 

 

Required Skills & Qualifications:  To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  The requirements listed below are representative of the knowledge, skills, qualifications, competencies, abilities and any physical demands if required.  Physical demands are representative of those that must be met by an employee to successfully perform the essential requirements of this job. 

  • Ability to read and interpret blueprints, mylars and other inspection media.

  • Two years aerospace inspection, quality experience or machinist experience is required.

  • Previous experience operating CMM equipment is desired.

  • Familiarity with CMM inspection operations and part or tool lay out.

  • Basic understanding of GDT.

  • Math skills should consist of CMM coordinates, datum’s and other math skills necessary to perform CMM inspection.

  • Ability to use measuring instruments including but not limit to calipers, micrometers, indicators, and scales.

  • Knowledge and use of Unigraphics and Catia software (CAD/ CAM), and digital data/digital product definition.

  • Knowledge of AS9100, SPC and NADCAP is a plus.

  • Have a good memory for detail.

  • Strong analytical and communication skills.

  • Organized and have good record keeping skills.

  • Read and understand internal procedures and policies

  • Team oriented with a continuous improvement outlook.

     

    Required Experience/Education/Training/Certifications:  To perform this job successfully, an individual must possess the outlined experience level, education, training, minimum years of experience, product or industry knowledge plus any certifications in order to be considered. 

  • High School Diploma; up to 3 years related experience in job function and/or training; equivalent combination of education and experience

  • Two years aerospace inspection, quality experience or machinist experience is required.

  • Basic understanding of GDT.

                                                                                                                                                           

Work Environment and Safety Equipment Required: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. 

  • Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.

  • Annual eye exam is required.

  • Must be able to frequently lift and/or move up to 50 pounds; reach with hands and arms; and effectively communicate.

  • Regularly required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls.

  • Occasionally required to sit and stoop.

  • Safety Footwear shall be in accordance with the following: ASTM standard F2413-05 with minimum impact resistance, compression resistance and metatarsal designation ratings of 75 foot pounds (i.e. ASTM F2413-05 I/75 C/75 Mt/75), which are viewable on the inside tag of footwear.

    Management reserves the right to add, modify, change or rescind the work assignments in accordance with business needs, and to make reasonable accommodations so that qualified employees can perform the essential function of the job.

Skills & Qualifications


3333 Main Street
Parsons, Kansas, 67357
United States

CHECK OUT OUR SIMILAR JOBS

  1. Tester Jobs
  2. Quality Assurance Jobs